moclamp

Mo-Clamp 4010 Frame Rack Uni-Body Clamp

MO-Clamp 4010 Frame Rack Uni-Body Clamp - Bar holes designed for three ways of pulling, using #4044 1/2 " Shackle and #4043 Oval Loop. Clamp has recessed pockets to hold bolts stationary for easy...

Mo-Clamp 4015 Frame Rack Jaws with Angle Bracket

MO-Clamp 4015 Frame Rack Jaws with Angle Bracket - Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two...

Mo-Clamp 4016 Frame Rack Angle Bracket Only

MO-Clamp 4016 Frame Rack Angle Bracket Only - Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044...

Mo-Clamp 4018 Mercedes Anchoring Adapters

MO-Clamp 4018 Mercedes Anchoring Adapters - For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).Overall Length: 14"...

Mo-Clamp 4020 4-Way Pull Clamp

MO-Clamp 4020 4-Way Pull Clamp - Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.Gripping Surface: 4" wide (102 mm), 3/4 " deep (19 mm) Overall...

Mo-Clamp 4021 Frame Rack Dyna-Mo #1

MO-Clamp 4021 Frame Rack Dyna-Mo #1 - One pair Frame Rack Dyna-mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tightening. Machine...

Mo-Clamp 4022 Frame Rack Dyna-Mo #2

MO-Clamp 4022 Frame Rack Dyna-Mo #2 - Two pair Frame Rack Dyna-Mo jaws with 12" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tightening. Machine...

Mo-Clamp 4024 Frame Rack Dyna-Mo Clamp

MO-Clamp 4024 Frame Rack Dyna-Mo Clamp - Make your own tool with this severe duty tooth designed clamp. Add side pull bracket when needed. Machine Tooth Design.Gripping Surface: 3-1/2" wide (95...

Mo-Clamp 4025 Frame Rack Jaws

MO-Clamp 4025 Frame Rack Jaws - Clamp has recessed pockets to hold bolts stationary for easy tightening.Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm) Overall Length: 5" (127 mm) Capacity: 6...

Mo-Clamp 4028 BMW Hold Down

MO-Clamp 4028 BMW Hold Down - For holding BMW vehicles with oblong or round jack tube holes.Overall Length: 14" (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer,...

Mo-Clamp 4030 3-Way Pull Clamp

MO-Clamp 4030 3-Way Pull Clamp - Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm) Overall...

Mo-Clamp 4035 Angle Bracket

MO-Clamp 4035 Angle Bracket - Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp..Overall Length: 6"...