Mo-Clamp

Mo-Clamp 5623 T23 Hinge Plate with 3/8" Shackle

MO-Clamp 5623 T23 Hinge Plate with 3/8" Shackle - Use in existing holes in frame structures or body panels. Comes with #5626 3/8" Shackle for angle pulls.Overall Length: 4" (101mm) Capacity: 3 tons (2,722kg) Heat Treated Steel. Made in the U.S.A.

Mo-Clamp 1800 Track Hook

MO-Clamp 1800 Track Hook - Quick tie-down for track systems or back anchoring on frame racks. Lip can be used for pulling damaged areas; varied multiple uses for chain lengthening or shortening. Slot can be used for chain hook-up. Designed for use with...

Mo-Clamp 4151 Grab Hook and Single Claw

MO-Clamp 4151 Grab Hook and Single Claw - Versatile combination for quick hook-ups and multiple pulls. 18-inches of 3/8" chain included.Overall Length: 24" (610 mm) Working Load Limit: 6,600 lbs Working Load Limit: Refers to the maximum load (rated...

Mo-Clamp 5820 Pinch Weld Brackets - Set of 4

MO-Clamp 5820 Pinch Weld Brackets - Weld-on pinch weld brackets. 12" brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system.Overall Length: 12"...

Mo-Clamp 6303 60" Nylon Sling

MO-Clamp 6303 60" Nylon Sling - Protects finish from mars.Overall Length: 60" (1,525mm) Width: 3" (76mm) Vertical Capacity: 2.5 tons (2,267kg) Choke Capacity: 2 tons (1,814kg) Basket Capacity: 5 tons (4,536 kg) Replacement Parts: #62101 Clevis Pin,...

Mo-Clamp 6250 3/8" Super Alloy Clevis Slip Hook

MO-Clamp 6250 3/8" Super Alloy Clevis Slip Hook Working Load Limit: 7,100 lbs Capacity 10 tons Replacement Parts: #62501 Retaining Pin, #62502 Spring Pin Heat Treated Steel. Made in the U.S.A.

Mo-Clamp 4146 Grab Hook/Slip Hook Combo

MO-Clamp 4146 Grab Hook/Slip Hook Combo - Grab hook on one end; slip hook on the other. For hooking into clamps or pull rings. Fast hook-up to any section of 3/8" chain.Overall Length: 9-1/2" (241 mm) Capacity: 7 tons (6,350 kg) Heat Treated Steel. Made...

Mo-Clamp 9801 Large Wedge for MO-0400 W Clamp

MO-Clamp 9801 Large Wedge for MO-0400 W Clamp

Mo-Clamp 1500 Pull Ring

MO-Clamp 1500 Pull Ring - The Pull Ring for the #2100 2MA Adapter Plate for unlimited body and frame pulls, such as frame horns, brackets, cowls, etc. Has recessed pockets to hold bolts stationary for easy, one-handed tightening.Overall Length: 4-1/2"...

Mo-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel

MO-Clamp 3130 Large Flat Nose Sheet Metal Hook, Swivel - Single individual large flat nose hook.

Mo-Clamp 4049 Frame Wrench

MO-Clamp 4049 Frame Wrench - Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the "pre-accident condition" look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two...

Mo-Clamp 5811 Snap Block

MO-Clamp 5811 Snap Block - Double your pulling power. Use this adapter with #5810 Down Pulley Assembly to make a Snap Block Pulley.Overall Length: 8-1/2" (210mm) Capacity: 5 tons (4,536kg) Replacement Parts: #6210 Hook Only, #520503 Bolt Assembly Heat...