Clamps

Mo-Clamp 6220 3/8" Super Alloy Clevis Grab Hook

MO-Clamp 6220 3/8" Super Alloy Clevis Grab Hook

Mo-Clamp 4018 Mercedes Anchoring Adapters

MO-Clamp 4018 Mercedes Anchoring Adapters - For holding vehicles with Mercedes-type jack tube holes. Jack pin adapters provided for early and late models (two different sizes).Overall Length: 14" (356 mm) Capacity: 6 tons (5,443 kg) Replacement Parts:...

Mo-Clamp 0050 A Clamp

MO-Clamp The A Clamp 0050 grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent for use with slide hammer. Clamp has raised "bolt stoppers" to hold bolts stationary, for easy, one-handed tightening. Use only with...

Mo-Clamp 5820 Pinch Weld Brackets - Set of 4

MO-Clamp 5820 Pinch Weld Brackets - Weld-on pinch weld brackets. 12" brackets for welding to bottom of automobiles without pinch welds. Works with most pinch weld holding systems. Allows for hook-up to a frame rack or hold-down system.Overall Length: 12"...

Mo-Clamp 6260 3/8" Alloy Clevis Slip Hook

MO-Clamp 6260 3/8" Alloy Clevis Slip Hook Working Load Limit: 5,500 lbs Capacity: 7 tons (6,350kg) Replacement Parts: #62101 Clevis Pin, #62102 Rue Clip Heat Treated Steel. Made in the U.S.A.

Mo-Clamp 1450 Numerous Angle Puller

MO-Clamp 1450 Numerous Angle Puller - The NAP allows pulls from any angle. Just put the bolt through a 1/2" hole and pull. Use with #2100 or #2400 Multi-Adapter Plates, or with back-up plates. Designed for use with 3/8" chain.Overall Length: 6" (152 mm)...

Mo-Clamp 4049 Frame Wrench

MO-Clamp 4049 Frame Wrench - Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the "pre-accident condition" look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two...

Mo-Clamp 5900 Mini Bite

MO-Clamp 5900 Mini Bite - The reversible Mini-Bite Clamp is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip. Designed for use with a 3/8" chain.Overall Length: 6"...

Mo-Clamp 4025 Frame Rack Jaws

MO-Clamp 4025 Frame Rack Jaws - Clamp has recessed pockets to hold bolts stationary for easy tightening.Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm) Overall Length: 5" (127 mm) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt &...

Mo-Clamp 4030 3-Way Pull Clamp

MO-Clamp 4030 3-Way Pull Clamp - Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop.Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm) Overall Length: 8" (203 mm) Capacity: 6 tons (5,443 kg) Replacement...

Mo-Clamp 0670 Baby Box Clamp

MO-Clamp 0670 Baby Box Clamp - Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross- hatch tooth design; spring-loaded for easy opening. Throat clearance of 1½" high (38 mm), 1¼" deep (32 mm).Gripping Surface: 1¾"...

Mo-Clamp 6319 Jumbo Sling

MO-Clamp 6319 Jumbo Sling - Biggest one we make. Designed for lower/ upper suspensions, door pillars and about anywhere you need a pull that conforms to odd shaped vehicle parts.Overall Length: 60" (762mm) Width: 3 " (78mm) Made in the U.S.A.